CABLES FOR HIGH TEMPERATURE AND HIGH VOLTAGE
Ariste
We cover the most different application ranges.
As manufacturer of industrial cables harnessing it is our business to analyse problems and design customised cables for industrial applications.
Conductor Materials:
- Silver platet copper
- Tinned copper
- Bare copper
- Nickel plated copper
- Nickel pure
Conductors Sections:
- 0,5 to 2,5 mm²
Insulation and Jacketing Materials:
- PTFE
- PFA
- FEP
- Fiberglass
- HT Silicon
- Polyolefin
Ariste
TERMINALS AND SLEEVES
STRAIGHT RECEPTACLES
A prerequisite for a good connection is that the male tab complies with certain technical and dimensional characteristics (for 0.4 and 0.8 thickness in accordance with DIN 64244); if these conditions are not met, this could lead to poor performance with regard to current flow (resulting in a rise in temperature on the connections) and, from a mechanical perspective, objective coupling difficulties.
- 6.3 mm range: this is the most popular product range in various industrial sectors thanks to its low cost and considerable versatility of use.
- 4.8 mm range: the use of these terminals is limited to applications which do not permit the use of the 6.3 mm due to size restrictions.
- 2.8 mm range: ideally used in electronics, radio communication and entryphone systems. A particular version of this range of terminals was built to meet the demands of telephone industries where particular technical specifications apply.
Flag type RECEPTACLES
The prerogative of these products, which have electrical characteristics similar to those of straight receptacles, lies in the particularly small footprint; they are used where straight receptacles cannot be used and in applications where a wire output at a right angle to the connection is more practical. There are two versions of this terminal for the 6.3 range, one with an F-crimp and the other with a rolled crimp – which meets the needs for an even smaller footprint. Receptacles for the 2.8 and 4.8 ranges are also available for the latter version
Open barrel crimping TERMINALS
They cover a comprehensive range of wire cross sections in the 6.3 – 4.8 – 2.8 ranges. One version of the 6.3 mm range has been designed for crimping on steel pins.
MALE TABS
They are used in the standard versions (6.3 – 4.8 – 2.8 mm) in all industrial sectors. This widespread use has made it possible to develop tabs for a wide variety of uses:
- Soldering on steel pins of armoured electrical resistors;
- With screw fixing holes;
- With special shapes to meet specific requests.
- Terminals with locking lance for multiple connections
Compared to standard lamellar connection terminals, their main variant is the presence of a locking lance which allows secure locking once inserted into the insulating blocks.
This line of terminals is available in the following versions: 6.3 – 4.8 – 2.8.
SLEEVES
Every cable can be covered with an additional insulation :
- PTFE
- PFA
- FEP
- Fiberglass
- HT Silicon
- Polyolefin
RESISTORS
The resistor element is a resistive wire which is wound in a single layer on a ceramic rod, with tinned connecting wires of electrolytic copper welded to the end-caps. The ends of the resistive wire and the leads are connected to the caps by welding. The resistors are coated with layers of green color fiame-proof lacquer
